Gheim Kimia Thread
Natural natural flavors
These products can be used in a variety of chips, snacks, popcorns, cashew nuts, Indian cranchi, pizza, Mexican corn, sandwiches, breadcrumbs, nuts, salads, and so on. All factories and food manufacturing factories, Fast food, restaurants and catering can use these products. One of the advantages of these products is that they are designed in such a way that they do not use any synthetic and synthetic materials in their formulation, and all the flavoring materials, colors and flavor enhancers are "natural".
In this group, all the flavors and essential oils are consumed in the beverage, dairy, cake and cookies, sweets and chocolates and other food products and have a clear appearance.
Sapphire Cyrople is a liquid product that combines the extracts of color and flavor extracted from class I saffron, natural colorants, stabilizers and emulsifiers. Extracting the taste and color of saffron as the main stage of product design, is done with a special technique. The amount of active ingredients in the color and taste is very high, so its consumption in the product is very low. Finally, the final product is standardized and supplied based on the amount of crocin (the main source of saffron color) and safranal (the main source of perfume of saffron).
The key to business success ....
Each 5ml contains:
Hydroalcoholic Extract of Foeniculum Fruits
Amazing 60 mg
Hydroalcoholic extract of Matricaria flower
Colombia 75 mg.
Hydroalcoholic extract of Mentha piperita 55 mg.
Adults and children over 6 years of age: 20-30 drops.
Children under the age of sixteen 15 to 20 drops.
The above is consumed in a cup of cold water 3-5 times a day before meals.
Patients with symptoms of esophageal reflux should reduce the size of the drug, which reduces the pressure of the wet sphincter, including peas.
Pregnancy and lactation:
During pregnancy and lactation, you should avoid gastrolans.
Composite Chisle 13 Shoots
Compact or protective dirt machine This machine is able to do soil and soil till the depth of 50 cm without first removing soil and primary soil. The machine is divided into 3 groups of 35-45-50 centners relative to the depth of work. The force Stretch to 5 models, which are: 5 branches with a width of 170 cm, require 65 to 75 HP of power, and 7 branches with a width of 210 cm, 70 to 90HP and 9 branches with a width of 250 cm, 90 to 110HP, and a 11-branch machine with a width of 300 cm And 100 to 130HP, and a 13-branch machine with a working width of 340 cm and 120 to 150 hp
Expand your business ...
Isfahan Aluminum Copal Co. is one of the first active companies in the center of Iran. It was built in 2000 on an area of more than 10 thousand square meters in Najaf Abad industrial monument in Isfahan with an initial capacity of 12,000 tons. We are proud of many years of efforts and brilliant record to make small projects in the corner of our beloved homeland with a lot of projects in building our country's construction industry.
Fortunately, in this short time, using the technology of the world and the cooperation of foreign specialists (Germany and Turkey), and the knowledge and experience of its portfolio managers, it has been able to absorb the largest volume of aluminum in the country. ST produces proprietary profiles and
Najvan Industrial Group
This product is used for evaporation interfaces from wood cellulosic material in water coolers, which creates a vaporized surface with the interconnected strands of the wood, which causes the air to flow through the air with moisture. The wood strands (shingle) are enclosed in a special plastic net and are seamed in a longitudinal and transverse direction so that the wood strands do not drop when water falls. Also, the spacing of the sewing rows is in a chess-like manner that covers the entire surface. The dimensions and size and thickness of the wood strands are such that, at the same time, they do not crush the surface by evaporation of the surface.
The density of wood filaments is such that it does not prevent the flow of air. High density, having wood chips or wood chips greatly slows the flow of air or prevents it from causing waste of energy (electricity and water), or with the help of the air flow through the threads of the tufts, it causes mass and dust to go. It is recommended that at least once a year, in normal and low dust areas, and in other areas, depending on the amount of dust and contamination of the tufts The water cooler is replaced by this, while saving water and electricity, reduces the decay of the water cooler body and increases the efficiency of water cooler in models 2800, 3000 , 3500, 4000, 4500, 5000, 5500, 7000, 7500, and 13000 for cooler production plants in their own specific sizes and lifetimes, and the useful life of the water cooler. The lack of its density, while waste of energy (electricity and water) causes water to drain on other parts: electro-pump, electro-motor, rotating parts and water cooler bearings.
Navigate to Percy on the highway
Gol Daro Pharmacy Company
ome modern studies have investigated the external use of Melissa extract to treat cutaneous Herpes simplex lesions (1). The approved modern therapeutic applications of Melissa officinalis are supportable based on its long history of use in well established systems of traditional medicine , on phytochemical investigations and on its documented pharmacological actions reported in vitro studies and in in vivo experiments in animals (2). A study on Melissa officinalis ( lemon balm) found that the plant extract possessed antiviral activity against a number of viruses including HSV ( Herpes Simplex virus ) (3). The extract appeared to inactivate viruses directly. Subsequent studies demonstrated that the antiviral activity of Melissa was due to tannins (4) but also to nontannin polyphenolic fraction. Phenolcarboxylic acids (e.g. caffeic and rosmarinic acid ) and their glycosides ( e.g. chlorogenic acid ) in Melissa , together with polymers formed from oxidation of these compounds were later identified (1). Although, such components are common in many plants , especially the Labiatae family, they are present at relatively high concentrations in Melissa. Their polymerization is responsible for the blackening of Melissa leaves which occurs on drying. These compounds were suspected to be nontannin antiviral agents in Melissa. Subsequent research found the Melissa extracts could inhibit protein biosynthesis in vitro and caffeic acid and probably its polymerization products were found to be active, but chlorogenic acid was not active. An unidentified glycoside was also responsible for significant inhibition of protein synthesis (1).
Despite the chemical and pharmacological uncertainty , clinical trials with Melissa for the topical treatment of recurrent HSV type 1 infections have yielded
conclusive results. One study found an improved
New Zayandehrood blue texture
Tina Towel Towel Service
Towel fabric is produced 100%
Tina's sewing service has a 100% quality guarantee and cotton production guarantee. One-way drainage and bilaterally drainage capacity
A golden opportunity, a valuable collaboration
Mantova cloth, Shirt, School uniform, Working clothes, Hospital
Turquoise fabric 235 grams per square meter in a variety of colors suitable for school mantle
Necklace with 280 g wide range of dressing suitable for all types of work clothes and nursing and surgical gowns.
Teflon fabric in different weights suitable for school shoe and bedding and ...
Cotton plaid cotton fabric with viscose polyester
Nikoobtsat Sepahan Co., with 15 years experience in producing varieties of garment and bed linen and shirts
The easiest and most important way of trading ...
Spadana Tower Builders
Towers, base cameras, traffic, urban furniture
In 1995, under license No. 48362, or the name of the lighting technology, street lights were installed, and in 1999, with the increase in production and obtaining a new license based on the mass production number of 4020 in order to reduce and industry-dependent in the lighting industry, the production of light bulbs 250 , 125, 400 Percy and Dacas key products after testing at Tehran University of Electronics and technical approval of the Electricity Commission for regional companies and distribution companies of the country and other government departments such as the municipality
Then, in 2014, the second unit of the plant, called the Spasadna Tower builders, in the Isfahan-Najaf Abad industrial zone with larger space and new cars licensed by the Ministry of Industries and Mines on 9/5002, began to build this lamp In different dimensions and distant parts, polygons and street brackets with electrostatic paint coating and epoxy, polyester and galvanized paint. At present, this industrial unit is able to produce various light towers, flag towers, steel structures, power transmission according to the standards of the country. Customer is the product.
Due to the cooperation of this production unit with the regional power companies all over the country, it produces its products to the countries of Central Asia and the neighboring countries and the sheikhs of the Persian Gulf.
It can be explained that a photocopy of legal documents and examples of contracts of previous years has been attached to Isfahan Electricity and the list of documents.
PE120 Electromechanical sealing
Electromechanical plumbing with "excellent" protection grade
Captioning serial number, name and logo
Plumbing container, ultralight security wagons
Orderable as can be produced.
Think with Prince C!
Isfahan Cast Iron Industries
Business: Casting, Machining & Finishing
Product range: Fifth wheel, row and heavy drive components in truck, trailer (display products)
Established in 1982
Store floor: 150,000 square meters with 40,000 square meters indoor
Process capability: 20,000 tons of cast iron per year and 5,000 tons of machining per year
Our plants are able to produce and handle casting from 1kg to 300kg
According to ISO / TS 16949-2009, the standard has been approved
Accredited ES / 2779 ISO 17025 laboratory from ISIRI for the fifth wheel
Standard license license 6341811925 from ISIRI for the fifth gear
With the development of its production capacity of up to 20,000 metric tons over an area of more than 100 square meters and with more than 200 manpower, the company is working to become one step towards the development of the country's industry through its active participation in the international arena. To leave .
The company has heavy and semi-heavy components at the national and international standards using facilities such as manual and fully automatic molding lines, induction furnaces of 5 and 15 tons, CNC machining units (universal), and the enhancement of its laboratory parts. Such as spectrometers, non-destructive mechanical and metallographic tests (production line display)
Honey fountains height of 70 centimeters polyester weighing 3 kilos
How do you get your business up?
Source the last hot selling product
Trade Alert - Delivering the latest product trends and industry news straight to your inbox.